After the sensor syncs, the station will start searching for the DCF signal (the tower icon will flash). This can take up to 7 minutes.
If you are outside the DCF range, you can set the time manually by holding the "SET" or "MODE" button for 3 seconds. 3. Button Functions & Navigation wireless weather station h10515 dcf manual verified
Reception is strongest at night. If the icon doesn't stop flashing, place the base station near a window facing Germany. After the sensor syncs, the station will start
This means the connection is lost. Hold the CH button to force a search. If that fails, bring the sensor inside, remove batteries from both units for 10 minutes, and restart the "Initial Setup" sequence. This means the connection is lost
Keep the unit away from heat sources (radiators) or large electronic devices (TVs, routers) that might interfere with the wireless frequency (433MHz). 5. Troubleshooting (Verified Fixes)
Short press to switch between outdoor sensor channels (if you have multiple). Hold to re-enter "search mode" for a lost sensor.