Thyssenkrupp Levant Stair Lift Installation Manual Fix Full May 2026

Comprehensive Guide: ThyssenKrupp Levant Stair Lift Installation Manual

This guide serves as a comprehensive overview of the installation process, mirroring the technical specifications found in the official installation manual. 1. Pre-Installation Checklist

Place the rail on the steps, ensuring a gap of approximately 5 inches (12 cm) between the rail and the wall. Step B: Secure the Mounting Brackets Attach the feet: Slide the mounting brackets onto the rail. thyssenkrupp levant stair lift installation manual full

Allow the unit to charge for at least 4–6 hours before the first full-weight test.

Slide the internal joint pins into the rail channels and tighten the joining bolts until the rail is a single, rigid piece. Step B: Secure the Mounting Brackets Attach the

Plug the transformer into your wall outlet and run the low-voltage wire to the rail’s charging point. 4. Calibration and Testing Once assembled, turn the unit on.

Ensure a minimum staircase width of 28–30 inches. Plug the transformer into your wall outlet and

The Levant is designed for straight indoor staircases only.