The error on a Ricoh device is a Service Call (SC) code specifically indicating a Fusing Pressure Release Motor Error . This fault occurs when the machine fails to detect the Home Position (HP) of the pressure roller release mechanism after three consecutive attempts. Common Causes of SC569-00
The pressure release motor may be locked due to an excessive load, or the motor driver itself could be defective. sc569-00 ricoh
The pressure roller HP sensor (often designated as S26 or SEN60) may be disconnected, dirty, or defective. The error on a Ricoh device is a
Dust or toner buildup on the "U-shaped" HP sensor can prevent it from detecting the actuator. sc569-00 ricoh