[portable]: Qidi X-pro Manual

The X-Pro arrives nearly ready to use, though some critical assembly and removal of shipping materials are required.

The QIDI X-Pro is a versatile, fully enclosed 3D printer featuring a unique dual direct-drive extrusion system designed for multi-material and multi-color printing. While the machine is largely pre-assembled, effective operation depends on following a precise setup and maintenance routine. qidi x-pro manual

The dual extruder assembly must be manually secured with two screws (typically 2.5mm). Orient the nozzles so the fans face forward. The X-Pro arrives nearly ready to use, though

Plug the power cord into the lower-left corner at the back and use the primary power switch to start the machine. Calibration and Bed Leveling The dual extruder assembly must be manually secured

The X-Pro uses assisted manual leveling via its 4.3-inch touchscreen to ensure a flat printing surface.

Check the power supply setting on the back or side of the machine to ensure it matches your local standard (110V or 220V) before turning it on.