The jumper is normally on pins 5-6 (or 1-2 depending on the label).
Required to access data on the drive. Note: Clearing the CMOS will not reset a hard disk password. Step 2: The Physical Reset (Clear CMOS Jumper) The most effective way to clear a BIOS password on the M720q Tiny Go to product viewer dialog for this item. is using the onboard jumper.
Remove the screw on the back of the case and slide the cover off.
often requires physical access to the motherboard. While standard user or power-on passwords can sometimes be bypassed by removing the CMOS battery, a typically requires a specific "Clear CMOS" jumper procedure or, in extreme cases, a motherboard replacement. Step 1: Differentiate Between Password Types
Reassemble the case, reconnect your peripherals, and power on. Press F1 or Fn+F1 during the logo screen to enter the BIOS and confirm the password prompt is gone. Alternative Method: Removing the CMOS Battery
Find the JP35 jumper block on the motherboard. On the
If the jumper method does not work, you can try a full power drain: M720q User Guide and Hardware Maintenance Manual