Jungheinrich Eje 120 Error Code 4372 |verified| -

: Switch the truck off and then back on again. In some cases, this clears minor signal glitches and allows the system to recalibrate its zero-point.

: If the sensors are functioning but out of alignment, a "Teach-In" process using factory software may be required to redefine the travel and hydraulic limits. jungheinrich eje 120 error code 4372

: Older EJE 120 models often have steering maps with narrow neutral tolerances. Jungheinrich has released firmware updates specifically to widen this neutral "window" and resolve persistent 4372 errors. : Switch the truck off and then back on again

Understanding Jungheinrich EJE 120 Error Code 4372 Error code on a Jungheinrich EJE 120 electric pallet jack typically indicates a "tiller head sensor analogue implausible" event. This critical fault generally occurs when the truck’s controller detects that the signals for drive, lift, or lower functions are not in their required "neutral" or "zero" positions during startup or operation. : Older EJE 120 models often have steering

: The sensors in the tiller head may not be returning to a true neutral position. If the "window" for what the software considers neutral is too narrow, even a minor physical misalignment can trigger the code.

: Check for physical obstructions in the tiller handle that might prevent the controls from returning fully to the neutral position.

: The analog signal from the traction or hydraulic sensor in the drawbar head may be abnormal or "implausible" to the main controller.