Jbl N7000 Schematic [best] May 2026

Uses an inductor in series with the signal to roll off frequencies above 7 kHz for the midrange/woofer (like the JBL 375 driver).

Uses a capacitor in series with the signal to protect the tweeter from high currents below 7 kHz.

The network contains two capacitors and two inductors . jbl n7000 schematic

The JBL N7000 is a classic frequency-dividing network designed specifically to integrate ultra-high-frequency (UHF) drivers, such as the JBL 075 tweeter , into high-fidelity loudspeaker systems. Whether you are restoring a vintage JBL Olympus or adding "brilliance" to a custom build, understanding the schematic is essential for maintaining original performance.

The N7000 circuit is relatively simple, consisting of two "cells" designed to provide a 12 dB per octave rolloff on each side of the crossover point. Typically set at 7,000 Hz . Uses an inductor in series with the signal

Thread: Rebuilding a JBL N7000. Possible? - LANSING HERITAGE

Most units feature a continuously variable ALPS level control or L-pad to adjust the tweeter output to match the room acoustics. Specifications and Compatibility The JBL N7000 is a classic frequency-dividing network

The N7000 was originally intended to bridge the gap between a 2-way system and a UHF driver to create a 3-way setup. LANSING HERITAGEhttps://www.audioheritage.org