Installation Manual - Harvey Hv3 Water Softener

Harvey HV3 Water Softener Installation Manual: A Step-by-Step Guide

Before you begin, ensure you have the correct tools and have checked your plumbing compatibility. Tools Needed: Pipe cutter or hacksaw Adjustable spanners Drill (if wall-mounting or creating a waste exit) Site Requirements: harvey hv3 water softener installation manual

This usually indicates a piece of debris is stuck in the internal valve. Turn the unit to bypass and contact a technician. Let the tanks fill with water gradually

Let the tanks fill with water gradually. Open the outlet valve: Close the bypass valve. Check for leaks: Inspect every joint and hose connection. Open a cold-water tap for a few minutes

Open a cold-water tap for a few minutes to clear any air pockets and fine resin particles.

You will need access to the rising main, a waste pipe, and an overflow point. 2. Positioning the Unit

The Harvey HV3 is one of the most compact and efficient twin-tank water softeners on the market. Known for its non-electric design and continuous softened water supply, it’s a favorite for UK households. While we always recommend professional installation by a Harvey-trained engineer, this guide provides a comprehensive overview of the installation process for those looking to understand the manual requirements. 1. Pre-Installation Checklist