Always calibrate your sticks inside the simulator software (e.g., ClearView or FPV Freerider) before flying to ensure the range of motion is mapped correctly.
For many setups, keep the transmitter turned off . Plugging into the trainer port will often power the internal logic board without activating the RF module, saving battery and preventing interference. Fs-sm100 usb driver
The Flysky FS-SM100 is a dedicated simulator adapter cable that connects the trainer port of an RC transmitter to a computer’s USB port. Unlike the standard "data cable" used for firmware updates, the SM100 is engineered specifically for control input, enabling realistic flight physics in software like . 2. Supported Transmitters and Compatibility Always calibrate your sticks inside the simulator software
FS-i6, FS-i6X (older firmware), FS-i10, FS-TH9X, FS-T6, FS-T4B, and the GT series for car simulators. The Flysky FS-SM100 is a dedicated simulator adapter
Once installed, check "Devices and Printers" ; the cable should appear as a game controller or "PPM" device. 4. Troubleshooting Common Issues
Plug the trainer port adapter into your transmitter, connect it to the 3.5mm jack of the SM100 cable, and plug the USB end into your PC.
If you encounter problems getting your sticks to respond, try these expert fixes: