Evoko Liso Factory Reset Verified May 2026

Insert a USB drive (at least 4GB; note that Kingston drives are often incompatible with Liso). Select the downloaded .gz image and flash it to the drive.

From here, you can manually , update the Server IP , or perform hardware Diagnostics . Updating Liso Firmware - Evoko - Biamp Cornerstone evoko liso factory reset verified

Ignore any Windows prompts to "format the drive" after flashing; these occur because the Liso uses a non-Windows partition. 2. Execute the Factory Reset Insert a USB drive (at least 4GB; note

: Wait for the message: "Flash has been successfully completed!" . Updating Liso Firmware - Evoko - Biamp Cornerstone

: Unplug the USB drive and restart the unit. It should now boot into the initial configuration screen. 3. Alternative: Administration Panel Reset

This process will erase all configuration, unpair the device from Evoko Home , and revert the firmware to the version on the USB.

You cannot simply copy files to a thumb drive; it must be "imaged" to become bootable.