: Find and select Waste Ink Pad Counter from the maintenance list and click OK . Check and Initialize :
: Run the program and click the Select button. Choose from the model list and select the corresponding USB port. Enter Adjustment Mode : Click on Particular Adjustment Mode . epson l5290 resetter
The Epson L5290 Resetter is a specialized utility program designed to communicate with the printer's internal firmware. Its primary job is to back to zero. : Find and select Waste Ink Pad Counter
: A pop-up will ask you to turn off the printer. Power it down, then turn it back on. The "Service Required" error should now be gone. Alternative: Resetting to Factory Defaults Enter Adjustment Mode : Click on Particular Adjustment Mode
If your printer is simply acting buggy—such as Wi-Fi connection issues or setting errors—you might not need a software resetter. You can perform a directly from the control panel: Go to Settings > Restore Default Settings .
Check the boxes for the Main Pad Counter (and any other listed counters). Click to confirm the memory is 100% full. Check the boxes again and click Initialize .
Choose to return the machine to its "out-of-the-box" state. Important Safety Note: Hardware Maintenance