Press and hold the Set (snowflake) button until the display shows "PAS" . Input Sequence: Press Set four times ( x4 ). Press the Up Arrow once ( x1 ). Press the Down Arrow twice ( x2 ). Press the Defrost/Teach button twice ( x2 ).
Compressor (9A), Lights (2A), Evaporator Fan (2A).
100-240VAC (internal power supply converts to 12VDC for the display).
Appliance or condenser sensor failure. The controller may stop the compressor to prevent damage.
Refrigeration system failure; indicates the unit has failed to reach the set point within the allotted time (often 72 hours). How to Perform a "Half Reset" (Hr)
IP65 for the front fascia (protection against dust and water splashes). Elstat EMS 55 Advanced Troubleshooting & Reset Guide
The higher temperature allowed during energy-saving periods. Pull-Down Temp
Press and hold the Set (snowflake) button until the display shows "PAS" . Input Sequence: Press Set four times ( x4 ). Press the Up Arrow once ( x1 ). Press the Down Arrow twice ( x2 ). Press the Defrost/Teach button twice ( x2 ).
Compressor (9A), Lights (2A), Evaporator Fan (2A).
100-240VAC (internal power supply converts to 12VDC for the display).
Appliance or condenser sensor failure. The controller may stop the compressor to prevent damage.
Refrigeration system failure; indicates the unit has failed to reach the set point within the allotted time (often 72 hours). How to Perform a "Half Reset" (Hr)
IP65 for the front fascia (protection against dust and water splashes). Elstat EMS 55 Advanced Troubleshooting & Reset Guide
The higher temperature allowed during energy-saving periods. Pull-Down Temp