Detectronic Model 606 Manual Verified [8K]

Often caused by electrical interference. Ensure the transducer cable is not run in the same conduit as high-voltage power lines.

Like all ultrasonic sensors, the Model 606 has a "dead band" (usually the first 12–18 inches from the sensor face). Ensure the maximum liquid level never enters this zone, or the sensor will provide "lost echo" errors. detectronic model 606 manual verified

The Model 606 is an ultrasonic level and flow meter designed primarily for industrial and municipal water applications. It uses non-contact ultrasonic technology to measure the head (height) of liquid in a flume or weir and converts that level into a flow rate using pre-programmed formulas. Measurement Principle: Ultrasonic Time-of-Flight. Output: Typically 4-20mA analog signal. Often caused by electrical interference

The 606 often includes programmable relays for high/low level alarms or pulse-per-volume totalization. 4. Step-by-Step Calibration (Quick Start) Ensure the maximum liquid level never enters this