: Turn the installation switch ( SW1 ) to the ON position. Calibration : Mark a "1m position" on the door frame.
The Crawford CDM9 complete set typically includes a 0.37 kW motor, approximately 60 Nm of torque, and a 10-meter cable for connection between the motor and the control box. : 340 x 230 x 140 mm. crawford cdm9 950 installation manual
Use the "Hold-to-run" command (pressing the Up/Down buttons) to bring the rubber sealing edge to the 1m mark. : Turn the installation switch ( SW1 ) to the ON position
: Standard CDM9 supports doors up to 400 kg; the HD version handles up to 800 kg. Supply Voltage : 230V AC, single phase, 50/60Hz. Operating Temperature : -20°C to +55°C. Mechanical Installation Steps : 340 x 230 x 140 mm
: Disengage the door and position it approximately 1.5 meters above the floor before engaging the operator again.