Bradex Bx60 Battery Charger Instructions Best Updated May 2026

: While not always mandatory, it is safest to disconnect the battery from the vehicle to protect the alternator from potential voltage spikes. Connect the Leads :

: Never place the charger directly on top of the battery. Keep it as far away as the cables allow to prevent corrosion from battery fumes. bradex bx60 battery charger instructions best

The BX60 is a 4-Amp charger. To estimate time, divide your battery's Amp-hour (Ah) rating by 4. For example, a 40Ah battery will take approximately 10 hours to charge from flat. : While not always mandatory, it is safest

: When you first start, the needle will likely show a higher reading (near 4 Amps) as the battery draws power. The BX60 is a 4-Amp charger

Before starting, inspect your battery. If it has removable caps, carefully remove them and ensure the liquid level is correct. If low, top it up with . Do not use tap water. 2. Monitoring the Ammeter

: Charging lead-acid batteries releases flammable gases. Always charge in a well-ventilated area away from sparks or open flames.

The BX60 uses a needle-based ammeter to show the current flow: