Bosch Kl 1206 Manual Fix -

Once the battery is charged, unplug the AC power first before removing the clamps from the battery terminals. Safety Warnings BOSCH KL 1206 E ➤ AUTODOC

Suitable for batteries ranging from 20 Ah to 90 Ah . Power Consumption: 85 W. Input Voltage: 230V / 50-60 Hz.

Connect the clamp to the positive (+) terminal of the battery. Bosch Kl 1206 Manual

Because this is an older "W" characteristic charger, the charging current will naturally drop as the battery voltage rises. You should monitor the battery temperature and charge status manually.

IP30 (basic indoor protection; not waterproof). Weight: Approximately 1.5 kg. Operating Instructions Once the battery is charged, unplug the AC

Connect the clamp to a metal point on the vehicle chassis (away from fuel lines) or directly to the negative (-) terminal if the battery is removed from the car. Powering On: Plug the charger into a 230V mains outlet.

Ensure the battery terminals are clean and free of corrosion. Connection: Input Voltage: 230V / 50-60 Hz

Using a manual charger like the KL 1206 requires more attention than modern "plug-and-forget" smart chargers, as it may not automatically stop when the battery is full.