Aodelan Wtr2 User Manual //top\\ -

Specific to your camera brand (Canon, Nikon, Sony, etc.).

Check if the receiver is turned on and the light glows red when you press the button. If it glows red but the camera doesn't fire, the cable is likely loose. LCD is faint: Replace the AAA batteries in the transmitter. aodelan wtr2 user manual

Usually requires AAA batteries for both units. 2. Setting Up the Connection Specific to your camera brand (Canon, Nikon, Sony, etc

Press Start. The remote will hold the shutter open for exactly two minutes and then close it automatically. 6. Pro Tips for Success LCD is faint: Replace the AAA batteries in the transmitter

The AODELAN WTR-2 is a "set it and forget it" tool that liberates you from standing behind the tripod. Once you master these menu settings, you can focus on the composition while the remote handles the timing.

This is the gap between shots. For a smooth sunset time-lapse, 5–10 seconds is common. Set N: Select how many photos you want to take.

Most "failures" are due to the cable not being seated fully into the camera port or the receiver. Give it a firm click. 7. Troubleshooting Common Issues