This is the primary reason people seek F/W 3613 tools. The MPTool is the only way to reset the "read-only" flag triggered by the controller's safety firmware.
You are using an older version of the MPTool. Look for a "New Style" (ALCOR_U2_MP) version of the software.
Most FA00 errors can be fixed by the "Optimized Capacity" or "Default" settings. Start: Click the "Start" (S) button. alcor micro unknown fa00 - f w 3613
Look for the (e.g., AU6989SN, AU6998) and the Flash ID Code .
Reliable databases for these tools include sites like or USBDev . Step 3: The Repair Process (Flashing) Warning: This process will destroy all data on the drive. Run as Administrator: Open the AlcorMP.exe file. This is the primary reason people seek F/W 3613 tools
If the tool doesn't see your drive, go to "Setup" and ensure the VID/PID matches what you found in Step 1.
The status bar will turn yellow (processing) and then green (pass). If it turns red, the memory chip itself might be physically dead. Troubleshooting Common Failures Look for a "New Style" (ALCOR_U2_MP) version of the software
Search for "AlcorMP" followed by your controller part number (e.g., "AlcorMP AU6989").